Bosch Vivatmo pro Bedienungsanleitung Seite 60

Network Configuration
Networktype
DHCP
IP-Address
Subnet Mask
Gateway
SSID
Securityprotocol
Password
S A V E
Manual WLAN configuration
1. On the Network screen, select Configure Network. The Network Configuration screen opens.
2. Select the Networktype WLAN.
3. Disable DHCP.
4. Follow steps 4 to 8 of "Supported installation of a WLAN connection".
5. Follow step 5 to 8 of "Manual ethernet configuration".
After a successful configuration, the Network Configuration screen is displayed.
6. Confirm with SAVE.
8. Confirm with SAVE.
Ethernet
enabled
– . – . – . –
– . – . – . –
– . – . – . –
BHCS
WPA2
••••••••••
Instructions for use © Bosch Healthcare Solutions GmbH
Settings
59