Settings
Setting Auto-Lock
Auto-Lock
Language
Time
Factory reset
Factory reset removes all stored measurements from the basestation and all data of patients and users. Date and time are reset
and no handheld will be connected afterwards.
Use factory reset prior to disposal or service returns only.
48
© Bosch Healthcare Solutions GmbH
When Auto-Lock is activated, the system shuts down to save energy and protect
patient data. The user needs to log in again after an automatic lockoff.
5 min
You can set the interval according to the needs in the clinical environment.
1. On the Device Settings screen, select Auto-Lock.
2. Select and hold the blue point and move it to the desired Auto-Lock time.
Instructions for use