Bosch Vivatmo pro Bedienungsanleitung Seite 54

S C A N F O R
Handheld
H A N D H E L D S
Language
NAME SERIAL NUMBER
Vivatmo pro
1234567890
Vivatmo pro
0987654321
If QC is activated, perform a QC-measurement after assigning a new handheld. The basestation
software stores the QC status of the handheld with each measurement.
2. On the Network screen, select Assign Handheld.
3. Turn on your handheld.
4. Select SCAN FOR HANDHELDS.
5. Wait until the scan procedure is completed.
You see the list of active handhelds.
If no handheld is active, you see the message: "No handhelds available".
6. Compare the number of the Vivatmo pro handheld in the list with the serial
number beneath the symbol
7. From the list, select the Vivatmo pro handheld which shall be installed with your
Vivatmo pro basestation.
8. The Configuring device screen opens.The handheld and the basestation connect
automatically.
The Vivatmo pro handheld and the Vivatmo pro basestation show the same date
and time now.
Instructions for use
on the handle of the handheld.
© Bosch Healthcare Solutions GmbH
Settings
53