Ambient No - Bosch Vivatmo pro Bedienungsanleitung

6.2

Ambient NO

Ambient Measurement
Release handheld from basestation
and firmly attach a new mouthpiece.
Ambient Measurement
last measurement : 2018-03-12 - 07:02
Please leave handheld in one place during
measurement.
Ambient Measurement
last measurement : 2018-03-12 - 07:02
18 PPB
The measurement was successful.
Please remove the mouthpiece.
Ambient NO measurement may help to interpret FeNO measurement results. To
perform an ambient NO measurement:
1. In the Settings menu, select AMBIENT NO.
The AMBIENT MEASUREMENT screen opens.
2. Turn on the handheld.
3. Attach a new mouthpiece, see "4.1 Measurement using the basestation".
4. Lay down the handheld in a way that the device has good access to the
ambient air.
5. Select the RUN MEASUREMENT button.
On the screen, you see that the ambient NO measurement is running.
When the ambient NO measurement is done, you see the result on the screen.
Instructions for use © Bosch Healthcare Solutions GmbH
Settings
39