Bosch Vivatmo pro Bedienungsanleitung Seite 32

4. The handheld device might be busy. Wait until the clock icon stops blinking.
Press the ENTER button to start the regeneration cycle.
While the handheld is regenerating, segments of the display will be animated to
indicate the handheld is preparing the measurement.
5. When the display shows the Breathing icon, start the measurement procedure
within 60 seconds. The LED on the back of the device turns blue.
6. Turn the device display downwards, so that you can see the LED at the back of
the device.
7. Sit in a relaxed position, inhale deeply through your mouth and lift the handheld
to your mouth.
8. Exhale softly through the disposable mouthpiece like cooling a hot drink, while
observing the LED side of the handheld.
The color of the LED provides feedback on the correct breathing strength:
yellow:
caution, too weak
blue: correct
red:
warning, too strong
Successful measurement: The LED flashes blue and the result appears on the
display. All results are automatically stored on the device.
Failed measurement: The LED flashes red and the Exhalation failed icon
appears on the display, see "Failed measurement".
9. Remove the mouthpiece.
10. Discard the mouthpiece, see "8.2 Disposing the mouthpiece".
Instructions for use © Bosch Healthcare Solutions GmbH
Measure
31