Bosch Vivatmo pro Bedienungsanleitung Seite 43

Settings
Qualification procedure
QC Tester
Language
Jeppe M. Gregersendan
Administrator
Konsta Haapakoski
Professional
Oona Pakarinen-Kattilakoski
Professional
Jeppe M. Gregersendan
Expired
N/A
QC-Measurements
2016-04-07 11 : 43
2015-10-07 13: 16
42 © Bosch Healthcare Solutions GmbH
Note: In the QC settings, the QC Tester control must be activated, see
"6.5 Administrator settings". Perform the following steps:
Qualifiying
1. In the Settings menu, select PERFORM QC.
1/3 Passed
Qualified The QC Tester screen opens and the actual user is highlighted and can be
selected.
2. Select the QUALIFY button.
3. Perform a regular measurement.
Q U A L I F Y
After the measurement the result can be:
• Qualify: Status during first 3 measurements of QC tester qualification.
• Passed: Result is within acceptance range of the mean of the last
3 measurements.
Passed
Passed
• Failed: Result is outside acceptance range of the mean of the last
3 measurements.
When the qualification procedure is passed, the qualification status of the
QC tester is changed to Qualified.
The qualified QC tester can perform the defined NO reference measurement test.
Instructions for use