Bosch Vivatmo pro Bedienungsanleitung Seite 59

Settings
Manual ethernet configuration
Network
Language
Configure Network
Show Network Configuration
Network Configuration
Select Networksetup
Networktype
DHCP
Select
enabled
disabled
Network Configuration
IP-Address Enter IP ...
1 2 3
4 5 6
7 8 9
0 D o n e
58 © Bosch Healthcare Solutions GmbH
1. Plug in the ethernet cable in the ethernet port of the basestation.
2. On the Network screen, select Configure Network.
3. Select the Networktype Ethernet.
4. Disable DHCP.
Ethernet
enabled
D o n e
5. Enter the IP-Address of your network and the Subnet Mask of your network.
6. Enter the Gateway ID.
7. Select the Right arrow or confirm with DONE to leave the screen.
Instructions for use