Supported Configuration Of An Ethernet Connection - Bosch Vivatmo pro Bedienungsanleitung

Settings

Supported configuration of an ethernet connection

Network Configuration
Select Networksetup
Networktype
DHCP
Network Configuration
Networktype
DHCP
S A V E
56 © Bosch Healthcare Solutions GmbH
1. Plug in the ethernet cable in the ethernet port on the rear of the
Vivatmo pro basestation.
2. On the Network screen, select Configure Network.
Ethernet
3. Select the Networktype Ethernet in the drop down menu.
enabled
4. Enable DHCP.
D o n e
5. Confirm with SAVE.
Ethernet
enabled
Instructions for use