Settings
QC Configuration
Select Number of Measurements
10
25
50
100
QC Configuration
Select Controls
Level 0
QC Tester
QC Configuration
Status
Inter val
After x measurements
Level 0
QC Tester
S A V E
50
© Bosch Healthcare Solutions GmbH
6. Enter the number of measurements to be performed before next quality control.
7. After selecting the interval, select the Arrow Right button.
Quality control is recommended with both Level 0 and QC Tester reference
controls.
on
8. Select activation or deactivation of this control methods.
on
9. Select the Arrow Right button to move to the next screen.
The QC Configuration screen opens with an overview of the current
QC settings.
on
10. Check your QC configuration.
on
11. Confirm with SAVE to save the QC configuration.
on
Instructions for use