Measurement Using The Basestation - Bosch Vivatmo pro Bedienungsanleitung

Measure
4.1

Measurement using the basestation

N E W M E A S U R E M E N T
S E L E C T M O D E
C O N T I N U E
New measurement
Release handheld from basestation
and firmly attach a new mouthpiece.
26 © Bosch Healthcare Solutions GmbH
1. Ensure that your handheld is switched on and connected to the basestation
(the bluetooth symbol on the handheld finished blinking, the handheld
connected icon is shown).
2. On the Home screen, select the MEASURE button.
On the basestation, SELECT MODE screen opens.
The regular measurement mode with a duration of 10 seconds is pre-selected.
The 6 second mode is for research use only. Press CONTINUE.
3. On the handheld display, the Disposable mouthpiece icon flickers.
Open the pouch and attach the disposable mouthpiece firmly in a way
that it fits securely on the device.
On the handheld display, the Disposable mouthpiece icon stops blinking.
WARNING
The 6 second measurement mode is for research use only and
not for use in diagnostic procedures.
Instructions for use