Belden Hirschmann EAGLE Referenzhandbuch Seite 621

Storm Control
42.1 storm-control
4 2 St or m Cont rol
4 2 .1 st or m -c ont rol
Configure the global storm-control settings.
4 2 .1 .1 st orm -c ont rol flow -c ont rol
Enable or disable flow control globally.

Mode: Global Config Mode

Privilege Level: Operator

Format: storm-control flow-control

no st orm -c ont rol flow -c ont rol
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no storm-control flow-control
4 2 .2 st or m -c ont rol
Storm control commands
4 2 .2 .1 st orm -c ont rol flow -c ont rol
Enable or disable flow control (802.3x) for this port.

Mode: Interface Range Mode

Privilege Level: Operator

Format: storm-control flow-control

no st orm -c ont rol flow -c ont rol
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no storm-control flow-control
4 2 .2 .2 st orm -c ont rol ingre ss unit
Set unit.

Mode: Interface Range Mode

Privilege Level: Operator

Format: storm-control ingress unit <P-1>
Parameter Value
P-1 percent
pps
4 2 .2 .3 st orm -c ont rol ingre ss unic a st ope ra t ion
Enable/disable ingress storm control for unicast frames with unknown destination.

Mode: Interface Range Mode

Privilege Level: Operator

Format: storm-control ingress unicast operation

no st orm -c ont rol ingre ss unic a st ope ra t ion
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no storm-control ingress unicast operation
162
Meaning
Metering unit expressed in percentage of bandwidth.
Metering unit expressed in packets per second.
RM CLI EAGLE20/30
Release 04.1 03/2021