Belden Hirschmann EAGLE Referenzhandbuch Seite 555

Open Shortest Path First (OSPF)
21.2 ip
Parameter Value
1..65535
P-1
2 1 .2 .8 ip ospf de a d-int e rva l
Configure the OSPF dead-interval for the interface, in seconds. If the timer expires without the router receiving
hello packets from the neighbor, the router declares the neighbor router as down. Set the timer to at least four
times the value of the hello-interval.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf dead-interval <P-1>
Parameter Value
P-1 1..65535
2 1 .2 .9 ip ospf c ost
Configure the OSPF cost for the interface. The cost of a specific interface indicates the overhead required to send
packets across the link. If set to 0, OSPF calculates the cost from the reference bandwidth and the interface speed.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf cost <P-1>
Parameter Value
P-1 <1..65535>
auto
2 1 .2 .1 0 ip ospf m t u-ignore
Enable/Disable OSPF MTU mismatch on interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf mtu-ignore

no ip ospf m t u-ignore
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no ip ospf mtu-ignore
2 1 .2 .1 1 ip ospf a ut he nt ic a t ion t ype
Configure authentication type.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf authentication type <P-1>
Parameter Value
none
P-1
simple
md5
2 1 .2 .1 2 ip ospf a ut he nt ic a t ion k e y
Configure authentication key.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf authentication key <P-1>
Parameter Value
string
P-1
2 1 .2 .1 3 ip ospf a ut he nt ic a t ion k e y-id
Configure authentication key-id for md5 authentication.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf authentication key-id <P-1>
Parameter Value
0..255
P-1
96
Meaning
Enter a number between 1 and 65535
Meaning
Enter a number between 1 and 65535
Meaning
Configure the cost for the specified interface.
Automatic calculation from reference bandwidth and link speed.
Meaning
Configure the authentication type as none (Key and key ID is not required).
Configure the authentication type as simple (Key ID is not required).
Configure the authentication type as md5 for the interface.
Meaning
<key> Configure the authentication key.
Meaning
Enter a number in the given range.
RM CLI EAGLE20/30
Release 04.1 03/2021