Belden Hirschmann EAGLE Referenzhandbuch Seite 485

Access Control List (ACL)
1.2 ip
dst: Specify the destination IP/mask.
[dport]: Specify the destination L4 port.
[proto]: Specify the protocol.
[fragments]: Match non-initial fragments
[log]: Enable Logging
[dscp]: Specify the DSCP.
[mirror]: Specify the mirror port.
[redirect]: Specify the redirect port.
[rate-limit]: Specify the rate limit and burst size.
[tos]: Specify the TOS.
[mirror]: Specify a mirror port.
[redirect]: Specify the redirect port.
[rate-limit]: Specify the rate limit and burst size.
[precedence]: Specify the IP precedence.
[mirror]: Specify the mirror port.
[redirect]: Specify the redirect port.
[rate-limit]: Specify the rate limit and burst size.
deny: Add a deny rule to an existing IP ACL.
src: Specify the source IP/mask.
[sport]: Specify the source L4 port.
dst: Specify the destination IP/mask.
[dport]: Specify the destination L4 port.
[proto]: Specify a protocol.
[fragments]: Match non-initial fragments
[log]: Enable Logging
[dscp]: Specify the DSCP.
[tos]: Specify the TOS.
[precedence]: Specify the IP precedence.
Parameter Value
1..10100
P-1
1..239
P-2
any
P-3
a.b.c.d
P-4 any
a.b.c.d
P-5 domain
echo
ftp
ftpdata
http
https
smtp
snmp
telnet
ssh
tftp
www
1-65535
any
P-6
a.b.c.d
any
P-7
a.b.c.d
26
Meaning
IP ACL ID
IP ACL Rule ID
Enter 'any' to match any ip address.
Enter the IP address to match.
Enter 'any' to match any ip mask.
Enter an IP mask to match. The 'Don't care bits' are represented by binary 1's
and 'Do care bits' are represented by binary 0's..
Domain
Echo
FTP
FTP Data
HTTP
HTTPS
SMTP
SNMP
Telnet
SSH
TFTP
WWW
Port number
Enter 'any' to match any ip address.
Enter the IP address to match.
Enter 'any' to match any ip mask.
Enter an IP mask to match. The 'Don't care bits' are represented by binary 1's
and 'Do care bits' are represented by binary 0's..
RM CLI EAGLE20/30
Release 04.1 03/2021