Belden Hirschmann EAGLE Referenzhandbuch Seite 529

Deep Packet Inspection (DPI)
12.2 show
Parameter Value
P-9 string
1 2 .1 .3 0 dpi dnp3 obje c t de le t e
Deletes an object from a DPI DNP3 rule.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi dnp3 object <P-1> delete <P-2>
Parameter Value
1..32
P-1
1..256
P-2
1 2 .2 show
Display device options and settings.
1 2 .2 .1 show dpi m odbus profile t a ble
Display the DPI MODBUS profile table.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show dpi modbus profiletable
1 2 .2 .2 show dpi m odbus pe nding
Display whether uncommitted changes for DPI MODBUS enforcer exist.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show dpi modbus pending
1 2 .2 .3 show dpi opc profile t a ble
Display the DPI OPC profile table.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show dpi opc profiletable
1 2 .2 .4 show dpi opc pe nding
Display whether uncommitted changes for DPI OPC enforcer exist.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show dpi opc pending
1 2 .2 .5 show dpi ie c 1 0 4 profile t a ble
Display the DPI IEC104 profile table.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show dpi iec104 profiletable
1 2 .2 .6 show dpi ie c 1 0 4 pe nding
Display whether uncommitted changes for DPI IEC104 enforcer exist.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show dpi iec104 pending
70
Meaning
Qualifier code list, hexadecimal numbers separated by a comma(e.g numbers
ranging between 0x00 to 0xFF).
Meaning
DNP3 profile index.
DNP3 Object index.
RM CLI EAGLE20/30
Release 04.1 03/2021