Belden Hirschmann EAGLE Referenzhandbuch Seite 535

HiDiscovery
15.1 network
1 5 H iDisc ove r y
1 5 .1 ne t w ork
Configure the inband and outband connectivity.
1 5 .1 .1 ne t w ork hidisc ove ry ope ra t ion
Enable/disable the HiDiscovery protocol on this device.

Mode: Privileged Exec Mode

Privilege Level: Operator

Format: network hidiscovery operation <P-1>
Parameter Value
enable
P-1
disable

no ne t w ork hidisc ove ry ope ra t ion
Disable the option

Mode: Privileged Exec Mode

Privilege Level: Operator

Format: no network hidiscovery operation <P-1>
1 5 .1 .2 ne t w ork hidisc ove ry m ode
Set the access level for HiDiscovery.

Mode: Privileged Exec Mode

Privilege Level: Operator

Format: network hidiscovery mode <P-1>
Parameter Value
read-write
P-1
read-only
1 5 .1 .3 ne t w ork hidisc ove ry blink ing
Enable/disable the HiDiscovery blinking sequence on this device. This preference is not saved in configuration

Mode: Privileged Exec Mode

Privilege Level: Operator

Format: network hidiscovery blinking

no ne t w ork hidisc ove ry blink ing
Disable the option

Mode: Privileged Exec Mode

Privilege Level: Operator

Format: no network hidiscovery blinking
1 5 .2 show
Display device options and settings.
1 5 .2 .1 show ne t w ork hidisc ove ry
Display the HiDiscovery settings.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show network hidiscovery
76
Meaning
Enable the HiDiscovery protocol.
Disable the HiDiscovery protocol.
Meaning
Allow detection and configuration.
Allow only detection, no configuration.
RM CLI EAGLE20/30
Release 04.1 03/2021