Belden Hirschmann EAGLE Referenzhandbuch Seite 522

Parameter Value
70
100
101
102
103
104
105
106
107
110
111
112
113
120
121
122
123
124
125
126
127
128..135
..
1..2
P-5
0..255
P-6
0..255
0..255
0..255
0..255/65535
P-7
0..255/65535
0..255/65535
0..255/65535
P-8 enable
disable
enable
P-9
disable
P-10 enable
disable
1..2
P-11
1..3
P-12
enable
P-13
disable
1 2 .1 .1 7 dpi ie c 1 0 4 m odify
Modifies a profile in the DPI IEC104 profile table.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi iec104 modify <P-1> [description <P-2>] [function-type <P-3>] [adv-type-
id-list <P-4>] [transmission-size <P-5>] [originator-addr-list <P-6>] [common-
addr-list <P-7>] [sanity-check <P-8>] [reset <P-9>] [debug <P-10>] [common-addr-
size <P-11>] [io-addr-size <P-12>] [allow-101 <P-13>]
[description]: Description/name for the DPI IEC104 profile.
[function-type]: Function type.
[adv-type-id-list]: Advanced type ID list.
[transmission-size]: Set cause of transmission size.
[originator-addr-list]: Originator address list (Configurable when cause of transmission size is 2).
[common-addr-list]: Common address list (For common address size 1, range is 0-255 and for common
address size 2, range is 0-65535).
[sanity-check]: Sanity check including format and specification.
[reset]: Reset connection message.
[debug]: Debug output in reset message.
[common-addr-size]: Set Common Address Size.
[io-addr-size]: Set IO address size.
RM CLI EAGLE20/30
Release 04.1 03/2021
Meaning
End of initialization m-ei-na-1
(General-) Interrogation command c-ic-na-1
Counter interrogation command c-ci-na-1
Read command c-rd-na-1
Clock synchronization command c-cs-na-1
( IEC 101 ) Test command c-ts-nb-1
Reset process command c-rp-nc-1
( IEC 101 ) Delay acquisition command c-cd-na-1
Test command with time tag cp56time2a c-ts-ta-1
Parameter of measured value, normalized value p-me-na-1
Parameter of measured value, scaled value p-me-nb-1
Parameter of measured value, short floating point value p-me-nc-1
Parameter activation p-ac-na-1
File ready f-fr-na-1
Section ready f-sr-na-1
Call directory, select file, call file, call section f-sc-na-1
Last section, last segment f-ls-na-1
Ack file, Ack section f-af-na-1
Segment f-sg-na-1
f-dr-ta-1
QueryLog - Request archive file f-sc-nb-1
Reserved for routing of messages
Type ID from 136-255 and undefined type IDs are reserved for special use
Specify the cause-of-transmission size.
Set originator address.
Set list of originator address with comma seperated e.g 1,5.
Set range of originator address e.g 5-10.
Set list and range of originator address e.g 1,5-10,120-255.
Set common address.
Set list of common address with comma seperated e.g 1,5.
Set range of common address e.g 5-10.
Set list and range of common address e.g 1,5-10,120-300.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Specify the common address size.
Specify the IO address size.
Enable the option.
Disable the option.
Deep Packet Inspection (DPI)
12.1 dpi
63