Belden Hirschmann EAGLE Referenzhandbuch Seite 524

Parameter Value
106
107
110
111
112
113
120
121
122
123
124
125
126
127
128..135
..
P-5 1..2
0..255
P-6
0..255
0..255
0..255
P-7 0..255/65535
0..255/65535
0..255/65535
0..255/65535
P-8 enable
disable
P-9 enable
disable
enable
P-10
disable
P-11 1..2
P-12 1..3
enable
P-13
disable
1 2 .1 .1 8 dpi ie c 1 0 4 de le t e
Deletes a profile from the DPI IEC104 profile table. You cannot delete an active profile or if an enforcer maps to it.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi iec104 delete <P-1>
Parameter Value
P-1 1..32
1 2 .1 .1 9 dpi ie c 1 0 4 e na ble
Enables a profile in the DPI IEC104 profile table. A profile can only be activated when all required parameters are
set. After activation no modifications are possible.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi iec104 enable <P-1>
Parameter Value
P-1 1..32
1 2 .1 .2 0 dpi ie c 1 0 4 disa ble
Disables a profile in the DPI IEC104 profile table. You cannot deactivate a profile if an active enforcer maps to it.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi iec104 disable <P-1>
Parameter Value
1..32
P-1
RM CLI EAGLE20/30
Release 04.1 03/2021
Meaning
( IEC 101 ) Delay acquisition command c-cd-na-1
Test command with time tag cp56time2a c-ts-ta-1
Parameter of measured value, normalized value p-me-na-1
Parameter of measured value, scaled value p-me-nb-1
Parameter of measured value, short floating point value p-me-nc-1
Parameter activation p-ac-na-1
File ready f-fr-na-1
Section ready f-sr-na-1
Call directory, select file, call file, call section f-sc-na-1
Last section, last segment f-ls-na-1
Ack file, Ack section f-af-na-1
Segment f-sg-na-1
f-dr-ta-1
QueryLog - Request archive file f-sc-nb-1
Reserved for routing of messages
Type ID from 136-255 and undefined type IDs are reserved for special use
Specify the cause-of-transmission size.
Set originator address.
Set list of originator address with comma seperated e.g 1,5.
Set range of originator address e.g 5-10.
Set list and range of originator address e.g 1,5-10,120-255.
Set common address.
Set list of common address with comma seperated e.g 1,5.
Set range of common address e.g 5-10.
Set list and range of common address e.g 1,5-10,120-300.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Specify the common address size.
Specify the IO address size.
Enable the option.
Disable the option.
Meaning
Profile index 1 - 32
Meaning
Profile index 1 - 32
Meaning
Profile index 1 - 32
Deep Packet Inspection (DPI)
12.1 dpi
65