Belden Hirschmann EAGLE Referenzhandbuch Seite 557

Open Shortest Path First (OSPF)
21.3 show
2 1 .3 .9 show ip ospf virt ua l-ne ighbor
Display the OSPF Virtual-link neighbor information

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip ospf virtual-neighbor
2 1 .3 .1 0 show ip ospf ne ighbor
Display the OSPF neighbor related information.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip ospf neighbor [<P-1>]
Parameter Value
P-1 slot no./port no.
2 1 .3 .1 1 show ip ospf st a t ist ic s
Display the OSPF statistics.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip ospf statistics
2 1 .3 .1 2 show ip ospf re -dist ribut e
Display the OSPF re-distribute related information

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip ospf re-distribute <P-1>
Parameter Value
P-1 connected
static
2 1 .3 .1 3 show ip ospf nssa
Display the OSPF NSSA related information.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip ospf nssa <P-1>
Parameter Value
P-1 A.B.C.D
2 1 .3 .1 4 show ip ospf rout e
Display the OSPF routes.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip ospf route
98
Meaning
Meaning
Select the source protocol as connected.
Select the source protocol as static.
Meaning
IP address.
RM CLI EAGLE20/30
Release 04.1 03/2021