Belden Hirschmann EAGLE Referenzhandbuch Seite 540

1 8 .4 c a ble -c rossing
1 8 .4 .1 c a ble -c rossing
Cable crossing settings on the interface. The cable crossing settings have no effect if auto-negotiation is enabled.
In this case cable crossing is always set to auto. Cable crossing is set to the value chosen by the user if auto-
negotiation is disabled.

Mode: Interface Range Mode

Privilege Level: Operator

Format: cable-crossing <P-1>
Parameter Value
P-1 mdi
mdix
auto-mdix
1 8 .5 link t ra ps
1 8 .5 .1 link t ra ps
Enable/disable link up/down traps on the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: linktraps

no link t ra ps
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no linktraps
1 8 .6 spe e d
1 8 .6 .1 spe e d
Sets the speed and duplex setting for the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: speed <P-1> [<P-2>]
Parameter Value
10
P-1
100
1000
P-2 full
half
1 8 .7 na m e
1 8 .7 .1 na m e
Set or remove a descriptive name for the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: name <P-1>
Parameter Value
string
P-1
RM CLI EAGLE20/30
Release 04.1 03/2021
Meaning
The port does not use the crossover mode.
The port uses the crossover mode.
The port uses the auto crossover mode.
Meaning
10 MBit/s.
100 MBit/s.
1000 MBit/s.
full duplex.
half duplex.
Meaning
Enter a user-defined text, max. 64 characters.
Interface
18.4 cable-crossing
81