Herunterladen Inhalt Inhalt Diese Seite drucken

Belden Hirschmann EAGLE Referenzhandbuch Seite 566

Grafische benutzeroberfläche industrial security router hisecos
Vorschau ausblenden Andere Handbücher für Hirschmann EAGLE:
Inhaltsverzeichnis

Werbung

2 5 .3 .2
lldp fdb-m ode
Configure the LLDP FDB mode for this interface.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp fdb-mode <P-1>
Parameter Value
lldp-only
P-1
mac-only
both
auto-detect
2 5 .3 .3
lldp m a x -ne ighbors
Enter the LLDP max neighbors for interface.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp max-neighbors <P-1>
Parameter Value
P-1
1..50
2 5 .3 .4
lldp not ific a t ion
Enable or disable the LLDP notification operation for interface.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp notification
no lldp not ific a t ion
Disable the option
Mode: Interface Range Mode
Privilege Level: Operator
Format: no lldp notification
2 5 .3 .5
lldp t lv m a c -phy-c onfig-st a t e
Enable or disable mac-phy-config-state TLV transmission.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp tlv mac-phy-config-state <P-1>
Parameter Value
P-1
[cr]
no lldp t lv m a c -phy-c onfig-st a t e
Disable the option
Mode: Interface Range Mode
Privilege Level: Operator
Format: no lldp tlv mac-phy-config-state <P-1>
2 5 .3 .6
lldp t lv m a x -fra m e -size
Enable or disable max-frame-size TLV transmission.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp tlv max-frame-size <P-1>
Parameter Value
P-1
[cr]
RM CLI EAGLE20/30
Release 04.1 03/2021
Meaning
Collected remote data will be based on received LLDP frames only.
Collected remote data will be based on the switch's FDB entries only.
Collected remote data will be based on received LLDP frames as well as on the
switch's FDB entries.
As long as no LLDP frames are received, the collected remote data will be based
on the switch's FDB entries only. After the first LLDP frame is received, the
remote data will be based on received LLDP frames only. This is the default
setting.
Meaning
Enter a number in the given range.
Meaning
Enable the Bit.
Meaning
Enable the Bit.
Link Layer Discovery Protocol (LLDP)
25.3 lldp
107

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hirschmann eagle20Hirschmann eagle30

Inhaltsverzeichnis