Belden Hirschmann EAGLE Referenzhandbuch Seite 525

Deep Packet Inspection (DPI)
12.1 dpi
1 2 .1 .2 1 dpi ie c 1 0 4 c opy
Copies a profile to another DPI IEC104 profile.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi iec104 copy <P-1> <P-2>
Parameter Value
1..32
P-1
1..32
P-2
1 2 .1 .2 2 dpi dnp3 profile a dd
Adds a profile to the DPI DNP3 profile table.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi dnp3 profile add <P-1> [description <P-2>] [function-code-list <P-3>]
[default-object-list <P-4>] [sanity-check <P-5>] [crc-check <P-6>] [outstation-
packets-check <P-7>] [reset-tcp-check <P-8>]
[description]: Profile description/name for the DPI DNP3 profile.
[function-code-list]: Function code list. A function code has the syntax 'val'. Function codes are separated
by a comma.
[default-object-list]: Object entries to be included from Default white list.
[sanity-check]: Sanity check including format and specification.
[crc-check]: CRC verification for DNP3 data link layer frames.
[outstation-packets-check]: Check the DNP3 data packets originating at an outstation.
[reset-tcp-check]: Reset the TCP connection in case of a protocol violation or if the plausibility check leads
to errors.
Parameter Value
P-1 1..32
string
P-2
66
Meaning
Profile source index 1 - 32
Profile destination index 1 - 32
Meaning
DNP3 profile index.
Profile description/name for the DNP3 profile.
RM CLI EAGLE20/30
Release 04.1 03/2021