Safety Instructions - Belden Hirschmann EAGLE Referenzhandbuch

Sa fe t y inst ruc t ions
UNCONTROLLED MACHINE ACTIONS
To avoid uncontrolled machine actions caused by data loss, configure all the data transmission devices
individually.
Before you start any machine which is controlled via data transmission, be sure to complete the configuration of
all data transmission devices.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
UNWANTED APPLICATION BEHAVIOR
Configuration of the Ethernet devices shall be done by an Ethernet expert.
Before you start any application based on an AFS and/or AFF network, be sure to complete the configuration of
all Ethernet devices correctly.
Failure to follow these instructions can result in equipment damage, serious injury or even death.
RM CLI EAGLE20/30
Release 04.1 03/2021
WARN I N G
WARN I N G

Safety instructions

19