Belden Hirschmann EAGLE Referenzhandbuch Seite 553

Open Shortest Path First (OSPF)
21.2 ip

no ip ospf re -dist ribut e
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf re-distribute <P-1> [metric] [metric-type] [tag] [subnets]
2 1 .1 .1 7 ip ospf dist ribut e -list
Configure the distribute list for the routes from other source protocols.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf distribute-list <P-1> <P-2> <P-3>
Parameter Value
out
P-1
connected
P-2
static
P-3 <1000..1099>

no ip ospf dist ribut e -list
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf distribute-list <P-1> <P-2> <P-3>
2 1 .1 .1 8 ip ospf de fa ult -info origina t e
Originate the OSPF default information.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf default-info originate [always] [metric <P-1>] [metric-type <P-2>]
[always]: Always advertise the 0.0.0.0/0.0.0.0 route information.
[metric]: Configure the metric for default information.
[metric-type]: Configure the metric type for default information.
Parameter Value
1..16777214
P-1
P-2 external-type1
external-type2

no ip ospf de fa ult -info origina t e
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf default-info originate [always] [metric <P-1>] [metric-type]
2 1 .2 ip
IP interface commands.
2 1 .2 .1 ip ospf ope ra t ion
Enable or disable OSPF on port.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf operation

no ip ospf ope ra t ion
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no ip ospf operation
94
Meaning
Configure as out to re-distribute routes with ACL rules
Select the source protocol as connected.
Select the source protocol as static.
Enter the access list number.
Meaning
Configure the metric value.
Set the metric type for default information as external type-1. The type 1
value sets the metric to the sum of the internal and external OSPF metrics.
Set the metric type for default information as external type-2. The type 2
value sets the metric to the sum of external OSPF metrics from the source AS
to the destination AS.
RM CLI EAGLE20/30
Release 04.1 03/2021