Change Of The Hinge Position - Pkm GK 225.4 A+EB Bedienungsanleitung

10. Now fix the appliance on the built-in unit. The distance appliance (handle
side) to Built-in unit must be 5 mm. The door must close properly. Fix the
covers of the feet and the sealing ledge.
sluggishness of the door.
noise while opening or closing the door.
potentially serious damage on your appliance and/or built-in unit.
In this particular case, PKM is not liable for any damage.
Additional side-attachment
Two security angles are included in delivery to stabilize the appliance when being
built-in. Fix the angles between the two doors on the appliance and on the side of
the built-in furniture. Fix the angle of the hinge-side in combination with the hinge.
Adjust the proper position of the angles by sliding them in the screw-
the right/left until they meet the sides of the built-in furniture.

3.3 Change of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
Disregarding these instructions will lead to:
49
penings to
o