Change Of The Hinge Position; Tools Required - Pkm KS 165.4 Bedienungsanleitung

3.5 Change of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the position must be carried out by at least
two persons; otherwise you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws
of the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
 Empty the appliance.
 Remove all door trays, glass shelves and drawers from the fridge (s. chapter
4.4.1 G
LASS SHELVES
damaged.
 It is necessary to tilt the appliance backwards while removing the door. You
should rest the appliance on something solid so it will not slip while changing
the hinge positions.
 Do not lay the appliance flat as this can damage the cooling system.
 All parts removed must be saved for proper reinstallation of the doors.
 Always remove the doors carefully. Keep the door in a safe place so that it
cannot be damaged.
P
REPARATORY MEASURES
and chapter 4.2.2 D
T
OOLS REQUIRED
 Cross-head screwdriver
 Flat bladed screwdriver
 Socket spanner 8 mm
64
0
.
:
) so that they cannot be
OOR TRAYS
: