Pkm GK 225.4 A+EB Bedienungsanleitung Seite 50

WARNING! Unplug the appliance before you change the hinge
position. Empty the appliance. Carry out the change with at least 2
persons.
CAUTION! The change of the position must be carried out by at least
two persons; otherwise you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws
of the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves and drawers from the fridge so
that they cannot be damaged.
➢ Lean the appliance against a wall or fixed item at such an angel you can reach
all screws easily.
➢ Do not lay the unit flat as this can damage the cooling system.
➢ All parts removed must be saved for proper reinstallation of the doors.
➢ Always remove the door(s) carefully. Keep the door(s) in a safe place so that
they cannot be damaged.
1. Disconnect the appliance from the power supply (unplug).
2. Lean the appliance against a wall or fixed item at such an angel you can reach
all screws easily.
3. Remove the top hinge screws.
P
REPARATORY MEASURES
H
OW TO CHANGE THE HINGE POSITION
0
.
:
50
: