Climatic Classes; Ambient Temperature; Installation; Site - Pkm KG 238.4 A+++N IX Bedienungsanleitung

2. Climatic classes

Look at chap. T
class of your appliance. Your appliance can be operated in rooms with
relevant room temperatures as named below.
CLIMATIC CLASS
SN
N
ST
T

3. Installation

3.1 Site

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is situated inside the appliance or at the back.

3.2 Change of the hinge position

WARNING! Unplug the appliance before changing the hinge position.

RISK OF ELECTRIC SHOCK!

CAUTION! The change of the hinge position must be carried out by
at least two persons; otherwise you may hurt yourself or damage the
All manuals and user guides at all-guides.com
D
ECHNICAL ATA
for information about the climatic

AMBIENT TEMPERATURE

+10 0 →+32 0 C e.g. unheated cellar
+16 0 →+32 0 C inner home temperature
+16 0 →+38 0 C inner home temperature
+16 →+43 C inner home temperature
0 0
30