6.2 Replacing of the illuminant
WARNUNG! The lamp on this device must only be
changed by a qualified technician!
1. Switch off the appliance and draw the plug
out of the socket. Risk of electrical shock!
2. The illuminant is on the top of the cooling
compartment.
3. Remove the top glass trays.
4. Remove the plastic cover of the illuminant. Remove the illuminant.
5. Install a new illuminant.
6. Install the cover.
According to the EU regulation No. 244/2009, your appliance is
classified as a household appliance in accordance with the eco-design
requirements for non-directional household lamps. This means that
bulbs, which are used in household appliances, must not be used to
illuminate domestic establishments.
6.3 Replacing of the power cord
DANGER!
The power cord must be replaced by a qualified
and authorized professional only.
7. Trouble shooting
WARNING! Before you start troubleshooting, disconnect the
appliance from the mains. Any work not described in this
instruction manual must be carried out by a qualified professional
only.
68