Change Of The Hinge Position; Preparatory Measures - Pkm Wolkenstein KGK 280 A+++ Bedienungsanleitung

If you have to move the appliance, set the adjustable supporting feet to
minimum position so the appliance can be moved on its rollers (depending on
model) easily. Readjust the appliance when transport has been completed.
NOTICE! The rollers (depending on model) are no castors and intended
to move the appliance forward and backwards only. Lateral movements
can damage your floor and the rollers.

3.4 Change of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the position must be carried out by at least
two persons; otherwise you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws
of the hinges. The seals must close properly.
 Empty the appliance.
 If possible, remove all door trays, glass shelves and drawers from the fridge /
freezer so that they cannot be damaged.
 It is necessary to tilt the appliance backwards while removing the doors. Lean
the appliance against a solid and immovable surface so it will not slip while
changing the hinge positions.
 Do not lay the unit flat as this can damage the cooling system.
 All parts removed must be saved for proper reinstallation of the doors.
 Always remove the doors carefully. Keep the doors in a safe place so that
they cannot be damaged.
T
OOLS REQUIRED
P
REPARATORY MEASURES
(
NOT INCLUDED IN THE SCOPE OF DELIVERY
68
:
):