Pkm GK 225.4 A+EB Bedienungsanleitung Seite 47

6
1. Place the appliance in the built-in unit.
2. The distance of the wall at the handle-side of the appliance and the wall of the
built-in unit must be 5 mm.
3. There are three drillings (two holes each) on the outer edge of the door of the
appliance where the sliding hinge brackets have to be fixed. Remove the hole
cover caps first.
4. Mark the position of the holes so that you can fix the hinge brackets in their
proper position. Ensure that the appliance is positioned properly.
5. Separate parts A, B, C and D (look at figure below ).
S
ECURITY ANGLE
Installation materials
With cover caps Without cover caps
47