Pkm GK 225.4 A+EB Bedienungsanleitung Seite 48

6. Fix hinge bracket A on the door of the built-in unit. Notice the height of the
holes on the door.
7. Fix cover C so that it snaps.
8. Open the doors of the appliance and the built-in unit (900). Insert the small
square B in the guide A. Press the doors together and mark the holes (look at
figure below). Remove the squares and drill the holes with a diameter of 2 mm
in a distance of 8 mm from the outer edge of the built-in unit. Insert square B
in the guide A again and fix it with the screws.
9. Fix cover D on B so that it snaps.
48