Adjusting The Hoeing Shares; Adjusting The Internal Conveying Ploughshares - Checchi & Magli AL Bedienungs- Und Wartungsanleitung

Adjusting the internal conveying ploughshares

The internal conveying ploughshares are used to accumulate more or less soil in the middle of the bed.
UN41-0308LI
To adjust the internal conveying ploughshares, proceed
as described.
1) Loosen the nuts (A).
2) Move the share (B) crosswise to the machine as nec-
essary.
3) Tighten the nuts (A).
Repeat the same procedure for the other share.
4) Loosen the screws (C).

Adjusting the hoeing shares

1
2
11 cm
3
1
4
UN41-0337LI
1 - Mulch sheet roll
2 - Seedbed or planting bed
English language
ADJUSTMENT INFORMATION
5) Tighten the screws (C).
Repeat the same procedure for the other share.
11 cm
3 - Hoeing shares
4 - Mulch sheets to be laid on the bed
20
- Raise or lower the share to increase or decrease the
amount of soil to be conveyed to the centre of the
bed.
- Alter the tilt of the ploughshare to increase or de-
crease the width of the strip of soil to be conveyed to
the centre of the bed.
5
Use and maintenance