Installation And Putting Into Operation; Selecting The Location - Mettler Toledo XPR26PC Benutzerhandbuch

Name
3 Level indicator
4 Methods menu
5 Info weight
Warning and error
6
message area
7 Drawer Protocol
8 Sample status OK
9 Sample status
Excluded
10 Sample status Not
OK
11 Button Add to
protocol
12 Action bar
13 Balance menu
14 Method information
area
15 SmartTrac
16 Weighing value area Shows the results of the current weighing process.
17 Method name

4 Installation and Putting into Operation

4.1 Selecting the location

A balance is a sensitive precision instrument. The location where it is placed will have a profound effect on the
accuracy of the weighing results.
Requirements of the location
Place indoors on stable
table
Pipette Calibration Balances
Description
Indicates if the balance is leveled (green) or not (red).
Accesses the user-defined list of methods, tests, and alignments.
Shows the current weighing value in another unit.
Shows current warning and/or error messages.
Shows the recent weighing results.
Result status indicator green: indicates that the result fulfills a set of criteria. For
example:
The balance is in level.
The internal adjustment was performed and ok.
The weighing result is within the defined tolerance range (only if tolerance is
defined).
Result status indicator black: indicates that the result was excluded from the
protocol.
Result status indicator red: indicates that the result criteria are not fulfilled, e.g.,
"The weighing result was out of the defined tolerances".
Adds the result to the protocol.
Depending on the selected method, the button can have different functions.
Contains actions referring to the current task.
Accesses the balance properties.
Contains information about the sample, method or task IDs.
Used as a weighing aid to define a target weight with upper and lower
tolerances.
Shows the name of the current method.
Ensure sufficient spacing Level the instrument Provide adequate lighting
7