Installation And Operation; Checking The Location; Connecting The Pbd655 Weighing Platform To The Weighing Terminal; Leveling - Mettler Toledo PBD655 Bedienungsanleitung

30303671A PBD655

3 Installation and Operation

3.1 Checking the location

The correct location is crucial for the accuracy of the weighing results.
1. Ensure that the location of the weighing platform is stable, vibration-free and horizontal.
2. The surface must be able to bear the weighing platform under maximum load at the
points of support.
3. Observe the following environmental conditions:
– No wet and/or corrosive environments
– No direct sunshine
– No strong draught or vibration
– No excessive temperature fluctuations
– Temperature range –10 °C to +40 °C / 14 °F to 104 °F

3.2 Connecting the PBD655 weighing platform to the weighing terminal

The digital weighing platform PBD655 is designed for use with fitting digital METTLER
TOLEDO weighing terminals.
➜ Connect the digital weighing platform cable with the 6-pin M12 connector to the
weighing terminal.

3.3 Leveling

Only a weighing platform which is aligned exactly horizontally supplies exact weighing
results. The weighing platform has to be leveled during the initial installation and whenever
its location is changed.
1. Turn the adjustable feet of the weighing platform until the air bubble of the spirit level
is positioned in the inner circle.
2. Tighten the lock nuts of the adjustable feet.
7
Installation and Operation