HP PHOTOSMART PREMIUM FAX e-ALL-IN-ONE C410 Serie Erste Schritte Seite 182

3
Install faceplate, if included
4
Connect and power on
Do connect the USB cable unless prompted by the software! (Windows
not
Connect the power cord and adapter.
5
Follow the Setup Wizard
Be sure to follow the instructions on the display as it
guides you through setting up and connecting the HP
Photosmart, including inserting ink cartridges and
setting up a wireless network connection.
For computers without a CD/DVD drive, go to
www.hp.com/support
software.
to download and install the
Install the faceplate
If you need to install a faceplate on the control panel:
1. Remove the existing faceplate by pulling up on the right
edge.
2. Position the new faceplate over the buttons on the control
panel.
3. Press down firmly on all edges of the faceplate until it
snaps into place.
Press to turn on the HP Photosmart.
WiFi Protected Setup (WPS) – (Optional)
This HP Photosmart supports WiFi Protected Setup
(WPS) for easy one-button wireless setup.
• During the setup, if you are prompted on the
display for Wi-Fi Protected Setup (WPS), and
your router supports this method, press the
WPS button on the router. If the connection is
successful, the wireless light on the Wireless
button will turn on.
• Alternatively, you can follow the setup wizard
on the printer display to connect using another
wireless setup method.
Register your HP Photosmart
Get quicker service and support alerts by
registering at www.register.hp.com.
182
only)
®