Certificates And Approvals; Installation; Incoming Acceptance, Transport, Storage; Transport And Storage - Endress+Hauser RID16 Bedienungsanleitung

RID16
3.3

Certificates and approvals

CE mark, Declaration of Conformity
The device is designed in accordance with good engineering practice to meet state-of-the-art
safety requirements, has been tested, and left the factory in a condition in which it is safe to
operate.
The device complies with the standards EN 61 010-1 "Protection Measures for Electrical Equip-
ment for Measurement, Control, Regulation and Laboratory Procedures" and with the EMC
requirements of IEC/EN 61326.
The device described in these Operating Instructions therefore complies with the statutory
requirements of the EU Directives. The manufacturer confirms that the device has been success-
fully tested by applying the CE mark.
The field indicator has successfully passed the PROFIBUS PA physical layer test. As a "non-active"
bus user it does interfere with Profibus data transfer.
Recognized component as per UL 3111-1.
CSA General Purpose.
4

Installation

4.1

Incoming acceptance, transport, storage

Compliance with the permitted environmental and storage conditions is mandatory. Precise
specifications are provided in the "Technical data" section .
4.1.1 Incoming acceptance
On receipt of the goods, check the following points:
• Is the packaging or the content damaged?
• Is the delivery complete? Compare the scope of delivery against the information on your order
form. See also the "Scope of delivery" section ( ä 28).

4.1.2 Transport and storage

Please note the following:
• Pack the device so that is protected against impact for storage and transport. The original
packaging provides optimum protection.
• The permitted storage temperature is -40 to +80 °C (-40 to +176 °F); it is possible to store the
device at borderline temperatures for a limited period (48 hours maximum).
4.2

Installation conditions

The indicator is designed for use in the field.
The orientation depends on the readability of the display.
Endress+Hauser
Installation
29