Symbols In Graphics; Safety Instructions; Requirements For The Personnel; Designated Use - Endress+Hauser RID16 Bedienungsanleitung

Safety instructions

1.2.4 Symbols in graphics

Symbol Meaning
1, 2, 3, ... Item numbers
Series of steps
, , ...
A0015662
A, B, C, etc. Views
A-A, B-B, C-C, etc. Sections
Flow direction
A0013441
Hazardous area
-
Indicates a hazardous area.
A0011187
Safe area (non-hazardous area)
.
Indicates the non-hazardous area.
A0011188
2 Safety instructions
2.1

Requirements for the personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill the fol-
lowing requirements:
‣
Trained, qualified specialists must have a relevant qualification for this specific function and
task
‣
Are authorized by the plant owner/operator
‣
Are familiar with federal/national regulations
‣
Before beginning work, the specialist staff must have read and understood the instructions in
the Operating Instructions and supplementary documentation as well as in the certificates
(depending on the application)
‣
Following instructions and basic conditions
The operating personnel must fulfill the following requirements:
‣
Being instructed and authorized according to the requirements of the task by the facility' s
owner-operator
‣
Following the instructions in these Operating Instructions
2.2

Designated use

‣
The device is a field indicator designed for connection to a fieldbus.
‣
The device is designed for installation in the field.
26
RID16
Endress+Hauser