Occupational Safety; Operational Safety; Product Safety - Endress+Hauser RID16 Bedienungsanleitung

RID16
‣
The manufacturer accepts no liability for damages resulting from incorrect use or use other
than that designated.
‣
Safe operation is only guaranteed if operators comply strictly with the Operating Instructions.
‣
Only operate the device in the designated temperature range.
2.3

Occupational safety

For work on and with the device:
‣
Wear the required personal protective equipment according to federal/national regulations.
2.4

Operational safety

Risk of injury!
‣
Operate the device in proper technical condition and fail-safe condition only.
‣
The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable dan-
gers.
‣
If, despite this, modifications are required, consult with Endress+Hauser.
Repair
To ensure continued operational safety and reliability,
‣
Carry out repairs on the device only if they are expressly permitted.
‣
Observe federal/national regulations pertaining to repair of an electrical device.
‣
Use original spare parts and accessories from Endress+Hauser only.
Environmental requirements
If a plastic transmitter housing is permanently exposed to certain steam and air mixtures, this
can damage the housing.
‣
If you are unsure, please contact your Endress+Hauser Sales Center for clarification.
‣
If used in an approval-related area, observe the information on the nameplate.
Hazardous area
Measuring systems for use in hazardous areas are accompanied by separate "Ex documentation",
which is an integral part of these Operating Instructions. Strict compliance with the installation
instructions and connection data as stated in this supplementary documentation is mandatory!
2.5

Product safety

This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC directives
listed in the device-specific EC Declaration of Conformity. Endress+Hauser confirms this by
affixing the CE mark to the device.
Endress+Hauser
Safety instructions
27