Installation And Connection Of Modules - Omnitronic W.A.M.S.-05 Bedienungsanleitung

5.6 Installation and connection of modules

Prior to installation, disconnect W.A.M.S.-05 system from the mains. Risk of electric shock!
5.6.1 Modules ALT-105, EM-105
■ Unscrew the screws of the control unit of the W.A.M.S.-05 system and remove the module. Pull the
plug of the 7-pin and the 6-pin (ALT-105) or 5-pin (EM-105) cable from the PCB of the W.A.M.S.-05
system.
■ When installing the transmitter module ALT-105, set switch SW200
module's 6-pin plug to the jack J204
■ When installing the echo module EM-105, set switch SW200
pin plug to the jack CON204
CAUTION!
[1] on the PCB and the 7-pin plug to the jack J201 [2].
[4] on the PCB and the 7-pin plug to the jack J201 [2].
45/56
[3] to "NORMAL". Connect the
[3] to "EFFECT". Connect the module's 5-
00031461.DOC, Version 1.1