Herunterladen Inhalt Inhalt Diese Seite drucken

Audio Player; Setting Up A Bluetooth Connection With Mobile Devices; Cleaning And Maintenance - Omnitronic DJP-900P Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Audio Player

The built-in audio player plays titles in MP3, WMA and WAV format from USB devices and SD(HC) memory
cards. Make sure the 3.5 mm jack is not connected; otherwise the audio player will be muted.
1)
Set the INPUT SELECT switch to the AUX 5 position to assign the signal of the audio player to the
master signal.
2)
Insert a USB device into the USB port and/or a memory card into the card slot (notched corner to the
left).
3)
After loading a data carrier, it is selected as the playback medium and the playback will start
automatically. The display indicates the playback source and the elapsed time of the current title in
minutes and seconds.
4)
Shortly press the [MODE] button to switch between the data carriers.
5)
By long actuation of the buttons [VOL‒/
audio player. There are 16 steps available (indication "U01-U16").
6)
To interrupt the playback, press the button [► ]. The display indicates "
again, press the button once again.
7)
By short actuation of the buttons [VOL‒/
direction.
8)
To remove a USB device, disconnect it from the USB port. To eject a memory card, slightly press it into
the slot until it comes out and can be removed. Prior to removing a device, always terminate the
playback with the [►II] button. Otherwise damage or loss of data may occur.

Setting up a Bluetooth Connection with Mobile Devices

The audio player features a Bluetooth receiver allowing you to stream music wirelessly from your mobile
devices such as smartphones, tablets and notebooks.
1)
Press the [MODE] button (repeatedly) until the display indicates "
player will enter the pairing mode.
2)
Activate the Bluetooth function at the Bluetooth source. The DJP-900P is indicated by "
the display of the Bluetooth source. Pair the devices with each other.
3)
Now play music at the Bluetooth source as you normally would and the sound will come out of the
amplifier.
4)
The Bluetooth source may also be operated via the audio player. To interrupt or continue the playback,
press the button [► ].With the buttons [
..............................................................................................................................................................................
6

CLEANING AND MAINTENANCE

1)
DANGER TO LIFE! Disconnect from mains before starting maintenance operation! Please use a soft
lint-free and moistened cloth. Never use alcohol or solvents!
2)
There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
3)
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.
] and [VOL+/
] you can adjust the internal volume of the
] and [VOL+/
] you can skip titles in forward or backward
bLUE "
] and [
] you can skip titles in forward or backward direction.
18
PAUS
". To start the playback
and a beep sounds. The audio
BLUETOOTH
" on

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis