4.8 Wireless microphone HM-105
■
Colored cap
There are 4 different color caps included in the delivery.
To replace a cap or to gain access to the battery
compartment or to the charging contacts press down the
grooved latch of the cap and remove the cap.
■
Cover
Remove the cover to replace discharged batteries.
■
Charging contact
Plug in the optional charger for the HM-105 here.
Remove the colored cap to gain access to the charging
contact.
■
On/Off button
Keep this button pressed for 2 seconds to switch on the
microphone. The power indicator lights up. The display
indicates O
, followed by the channel adjusted and the
n
battery status.
■
Power indicator
Lights up with fully loaded batteries.
■
Battery compartment
Insert batteries or rechargeable batteries type AA here.
■
Sensitivity/ Mute switch
upper position:
central position:
lower position:
■
▲/▼ buttons
To adjust the frequency. As long as one of these buttons
is pressed, the display indicates the frequency instead of
the channel.
■
LCD screen
Indicates the transmission channel or the radio frequency
and the battery charging status.
■
SET button
To activate the adjusting mode for the transmission
channel and to confirm.
41/56
high sensitivity
low sensitivity
mute
00031461.DOC, Version 1.1