Transmitter Module Alt-105; Echo Module Em-105 - Omnitronic W.A.M.S.-05 Bedienungsanleitung

4.4 Transmitter module ALT-105

■ LCD screen
Indicates the transmission
frequency.
■ Transmitting LED TX
Lights up when the transmitting unit is switched on.
■ Level LEDs AF
Indicate the input level of the transmitting unit.
■ SET button
To activate the adjusting mode for the transmission
channel and to confirm.

4.5 Echo module EM-105

■ Echo control
Turn the control clockwise to turn on the echo effect and
to adjust the volume for the echo module.
■ Repeat control
Adjusts the number of repeats of the internal echo effect.
■ Delay control
Adjusts the delay time of the internal echo effect.
.
channel or the radio
38/56
■ ▲/▼ buttons
To adjust the frequency. To indicate the frequency
instead of the channel on the display keep one of these
buttons pressed.
■ On/Off/Volume control
In position OFF, the transmitter is switched off. Turn the
control clockwise to switch on the transmitter and to
adjust the desired volume
transmitted.
■ MIC controls 1/2
To adjust the signal part for the microphones.
■ Microphone inputs MIC 1/MIC 2
6.3 mm jacks for connecting microphones.
■ Charge Indicator
See chapter 4.7.
■ Power On/Off
See chapter 4.7.
00031461.DOC, Version 1.1
for the audio signal