MACHINE DESCRIPTION
OPERATION CAPABILITIES
This sweeper has been designed and built to clean (by
sweeping and vacuuming) smooth and solid floors, in civil
and industrial environments and to collect dust and light
debris under safe operation conditions by a qualified
operator.
CONVENTIONS
Forward, backward, front, rear, left or right are intended
with reference to the operator's position, that is to say on
the driver's seat with the hands on the handlebar (1, Fig.
C).
DESCRIPTION
Control panel
(See Fig. B)
1.
Left control panel
2.
Ignition switch
3.
Discharged battery warning light (red)
4.
Semi-discharged battery warning light (yellow)
5.
Charged battery warning light (green)
6.
Display
7.
Display selection push-button: hour counter/hour and
minute counter/battery voltage (V)
8.
Horn
9.
Switch having the following functions:
– in the central position: off
– pushed forward (fixed): it turns on the main broom
and the vacuum fan
– pushed backward (not fixed): it turns on the filter
shaker
10. Manual vacuum system switch (optional)
11. Working light switch (optional)
12. Emergency push-button
13. Control panel mounting screws
14. Right control panel
15. Forward/reverse gear switch
16. Steering column inclination adjusting lever
Outside view
(See Fig. C)
1.
Steering wheel
2.
Control panel
3.
Vacuum activation/deactivation lever
4.
Side broom lifting/lowering lever
5.
Drive pedal
6.
Service brake pedal
7.
Parking brake lever (it acts on the front wheel)
7a. Brake engaged
7b. Brake disengaged
146 2596 000(3)03-2016
USER MANUAL
8.
Front skirt lifting pedal
9.
Can holder
10. Hood
11. Rear wheels on fixed axle
12. Front driving and steering wheel
13. Right side broom
14. Left side broom
15. Main broom
16. Left side skirt
17. Right side skirt
18. Front skirt
19. Rear skirt
20. Hopper
21. Hopper hook
22. Hopper handle
23. Main broom left door
24. Main broom height left adjusting knob
25. Main broom height right adjusting knob
26. Main broom right door
27. Main broom right door mounting screws
28. Pivoting light (always on when the ignition switch is
turned to "I" position) (optional)
29. Driver's seat with safety microswitch
30. Additional hole for manual vacuum system kit
(optional)
31. Adjustable steering column
32. Working light (optional)
33. Side broom height adjusting knob
34. Seat longitudinal position adjusting lever
35. Manual vacuum system (optional)
36. Side broom height adjusting knob ring nut
Under-hood compartment
(See Fig. U)
1.
Serial number plate/technical data/EC certification
2.
Hood (open)
3.
Hood support rod
4.
Batteries
5.
Battery caps (for WET batteries)
6.
Battery connector
7.
Electronic battery charger (optional)
8.
Battery charger connecting cable
9.
Lamellar fuse box (accessories)
10. Drive system circuit breaker
11. Main broom/fan motor circuit breaker
12. Lead (WET) or gel (GEL) battery selector switch on
the optional electronic battery charger
13. Charged battery warning light (green)
14. Main broom belt
15. Main broom drive pulley
16. Vacuum fan
17. Main motor
18. Manual vacuum system (optional)
19. Switch for machine pushing
20. Battery installation diagrams
ENGLISH
FLOORTEC R 360 B
5