Non-Stick Coating - Gastroback 42524 Bedienungsanleitung

vaporize and splash, causing high risk of severe scalds and damage.
In general, remove any packaging from your food, before grilling.
When grilling wrapped food, ensure that high-quality aluminium
foil is used that is suited for gilling. DO NOT use any plastic foil or
thin tin foil that may be used for storage or for any type of oven. Please
observe the hints of the foil producer.

NON-STICK COATING

• The grilling plates of your » Design Table Grill Plancha & BBQ « are
provided with a non-stick coating on both sides. Do not use hard or
sharp-edged objects for scratching, stirring, or cutting on the non-stick
coating (e.g. knives, forks, metal grilling utensils). Only use wooden
or heat-resistant plastic cooking utensils with the appliance. We will
not be liable for damage to the non-stick coating, if unsuited utensils
have been used.
• Before the very first use: wipe the non-stick coating of the grilling
plates with a little cooking oil that is suited for high temperature. The-
reafter, there is no need for adding any oil for cooking.
• Do not use the appliance, if the non-stick coating is scratched, cracked
or detached due to overheating.
• The non-stick coating minimises the effort of cleaning. Do not use
abrasive scorers or abrasive cleaners for cleaning. Even stubborn
residues can be removed via a soft sponge or soft nylon brush and
warm dishwater. Alternatively, clean the grilling plates in the auto-
matic dishwasher. Do not use any spray-on non-stick coatings, oven
cleaners, or similar utilities.
EN
40