Oerlikon GC-Serie Betriebsanleitung Seite 30

2. General Safety Guidelines
Safety Measures prior to
Maintenance Work
Check Safety Devices
Report Malfunctions
Qualified Electrician
Safety Regulation for
Process Material
Page 24 Customer: Basis Version 05
∙
Perform maintenance work only while the machine / ma­
chine parts are shut off. Do not start the work until all ro­
tating parts have come to a complete standstill.
In addition, protect yourself against accidental restart by
activating the main switch.
Secure the main switch against unauthorized restart by
means of a padlock.
∙
Inspect the line / machine for deficiencies prior to
start‐up.
∙
Make sure that all safety devices on the machine are in
place and operative.
∙
Do not remove any protective devices or other safety
equipment. If it is necessary to dismantle any of these
devices, however, for example during maintenance or
cleaning work, the devices must be reinstalled and
checked immediately after completion of work.
∙
Leave switching on / starting up the machine to qualified
individuals who have been specifically assigned to per­
form these functions.
∙
Prior to switching on / starting up the line / machine,
please make sure that there is no risk to anybody due to
such action.
∙
If any changes are observed in the line / machine or in its
operating behavior, shut the line / machine off immedi­
ately and report the malfunction to the person in charge.
∙
Make sure that systems under pressure (e.g. melt, heat­
transfer, pneumatic, or hydraulic lines and vessels) are
depressurized before opening, for instance during main­
tenance work.
See also the special guidelines in the Chapter "Mainte­
nance".
∙
Work on the electrical equipment of the line / machine
must be performed exclusively by a qualified electrician
or by properly trained individuals under the guidance and
supervision of a qualified electrician in accordance with
the regulations governing electrical installations.
∙
When handling oil, grease, and other chemical sub­
stances please observe the safety rules prescribed for
the specific product.
∙
Use caution when handling hot operating supplies or pro­
cess materials (danger of burns or scalding).
Order: 000000-000 Edition: 01.20