Introduction; Intended Use; Features - Parkside POF 1200 D3 Originalbetriebsanleitung

ROUTER POF 1200 D3

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is designed for milling grooves,
edges, profiles and oblong holes in wood, plastic
and lightweight materials on a fixed support, as well
as for copy milling. The appliance is not intended for
use outside. Any other uses of or modifications to the
appliance are deemed to be improper usage and
may result in serious physical injury. Not for commer-
cial use.

Features

Fig. A
Speed preselection
Handle
Safety lock-out
ON/OFF switch
Collet chuck 8 mm
Union nut
Locking screw
Guide rail
Holes for the dust extraction adapter
9a
Base plate
Skid plate
Step stop
│ GB │ IE
■ 16
Spindle locking button
Locking screw
Depth stop
Milling depth adjustment scale
Dial (fine milling depth adjustment)
Fig. B
Dust extraction adapter
Screw
Collet chuck 6 mm
Centring point
Rip fence
Copy sleeve
Race
Open-ended spanner with slotted hole
Hex key
Sliding rod
Reducer
Fig. D
Rounding cutter Ø 22 mm/R 6.3 mm
Profile cutter Ø 25 mm/R 4 mm
Chamfer milling cutter Ø 22 mm/R 6.3 mm
V-slot milling cutter Ø 12,7mm/angle 90°
Slotting cutter Ø 6 mm
Slotting cutter Ø 12 mm
Fig. F
Clamping lever
Fig. H
Dial
Scale ring
Wing screws for adjusting the sliding rod
Scale
Screws for the sliding jaws
Fixing wing screw
POF 1200 D3