Herunterladen Inhalt Inhalt Diese Seite drucken

Supplementary Notes; Original Accessories/Auxiliary Equipment; Before Use; Milling Cutter Set - Parkside POF 1200 D3 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für POF 1200 D3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Supplementary notes

The maximum speed of the milling tool used
must be at least as high as the maximum
speed specified for the power tool. Accesso-
ries which rotate faster than the maximum
permissible rate can be destroyed.
Cutters or other accessories must fit exactly
into the collet chuck (shank diameter 6/8 mm)
of your power tool. Milling tools which do not
fit precisely into the collet chuck of the power
tool will rotate unevenly, vibrate severely and
can lead to a loss of control.
Always switch on the electrical power tool
before applying it to the workpiece. Other-
wise, there is a risk of a kickback if the acces-
sory tool gets caught in the workpiece.
Keep your hands clear of the milling area and
the milling tool. Hold the auxiliary handle or
motor housing with your other hand. If both
hands are being used to hold the milling machine,
neither can be injured by the milling cutter.
Never mill over metal objects, nails or screws.
The milling cutter can be damaged and it can
lead to increased vibrations.
Use a suitable detector to locate hidden utility
lines or consult your local utility company.
Contact with electrical lines can cause fires or
electric shocks. Damage to a gas pipeline can
lead to an explosion. Drilling into a water pipe
can cause damage to property.
The maximum speed indicated on the tool must
not be exceeded.
Tools with visible cracks must be discarded.
Original accessories/auxiliary
equipment
Only use the accessories and additional
equipment that are specified in the operating
instructions and are compatible with the
appliance.
GB │ IE
20 

Before use

Milling cutter set

Original accessories included in delivery
For profiling
Rounding cutter Ø 22 mm/R 6.3 mm
Profile cutter Ø 25 mm/R 4 mm
Chamfer milling cutter Ø 22 mm/R 6.3 mm
V-slot milling cutter Ø 12,7mm/angle 90°
For linking
Slotting cutter Ø 6 mm
Slotting cutter Ø 12 mm
NOTE
If the ball bearing of a milling cutter has
become loose, tighten it with the hex key
supplied with the cutter set.

Inserting a milling tool

Press the spindle locking button
down.
Undo the union nut
wise with the open-ended spanner
Release the spindle locking button
Now insert the milling tool.
This must be inserted to a depth of at least
20 mm.
Press the spindle locking button
down.
Tighten the union nut
spanner
.
Release the spindle locking button
Connecting the dust extraction
adapter
Fit the dust extraction adapter
provided for the dust extraction adapter
Screw the screws
base plate
.
Attach an approved dust and sawdust extractor
to the dust extraction adapter
and hold it
by turning it anticlock-
.
.
and hold it
using the open-ended
.
onto the holes
.
9a
into the underside of the
(see fig. F).
POF 1200 D3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis