General Specifications - Yamaha YZ250 Handbuch

EC200000
SPECIFICATIONS
EC211000

GENERAL SPECIFICATIONS

Model name:
Model code number:
Dimensions:
Overall length
Overall width
Overall height
Seat height
Wheelbase
Minimum ground clearance
Dry weight:
Without oil and fuel
Engine:
Engine type
Cylinder arrangement
Displacement
Bore × Stroke
Compression ratio
Starting system
Lubrication system:
Oil type or grade (2-Cycle):
Transmission oil
Periodic oil change
Total amount
Coolant capacity (including all routes):
Air filter:
Fuel:
Type
Tank capacity
GENERAL SPECIFICATIONS
YZ250W1 (USA, CDN)
YZ250 (EUROPE, ZA)
YZ250W (AUS, NZ)
1P89 (USA, CDN)
1P8A (EUROPE)
1P8C (AUS, NZ, ZA)
USA, AUS, NZ, ZA
96.0 kg (211.6 lb)
Liquid cooled 2-stroke, gasoline
Single cylinder, forward inclined
249 cm
66.4 × 72 mm (2.614 × 2.835 in)
9.2~10.9 : 1 (For USA and CDN)
8.9~10.6 : 1 (For EUROPE, AUS, NZ and ZA)
Kick starter
Premix (30 : 1)(Yamalube 2-R)
Yamalube 4 (10W-30) or SAE 10W-30 type SE
motor oil
0.75 L (0.66 Imp qt, 0.79 US qt)
0.80 L (0.70 Imp qt, 0.85 US qt)
1.20 L (1.06 Imp qt, 1.27 US qt)
Wet type element
Premium unleaded gasoline
only with a research octane
number of 95 or higher
8.0 L (1.76 Imp gal, 2.11 US gal)
2-1
2,178 mm
(85.7 in)
827 mm
(32.6 in)
1,306 mm
(51.4 in)
994 mm
(39.1 in)
1,481 mm
(58.3 in)
382 mm
(15.0 in)
3 (8.76 lmp oz, 8.42 US oz)
SPEC
EUROPE, CDN
2,184 mm
(86.0 in)
←
1,309 mm
(51.5 in)
997 mm
(39.3 in)
←
385 mm
(15.2 in)