Yamaha YZ250 Handbuch Seite 124

1 Clamp
2 Wireharness
3 High tension cord
4 CDI unit band
5 CDI unit
6 CDI unit lead
7 Connector cover
8 Radiator hose
9 Radiator breather hose
0 CDI unit stay
CABLE ROUTING DIAGRAM
A Clamp the wireharness to the
right engine bracket.
B Pass the high tension cord to
the right of the radiator hose so
that the high tension cord does
not contact the radiator hose.
C Pass the CDI unit lead between
the frame and the radiator
(right) and then above the radia-
tor fitting boss.
D Bring the connector cover into
contact with the coupler.
E Pass the radiator breather hose
behind the radiator hose.
F Insert the CDI unit band until it
stops at the CDI unit stay.
2-16
SPEC