Commissioning, Operation And Decommissioning; Checklist For Commissioning - Elmo Rietschle Vlr 1000 Hv+ Originalbetriebsanleitung

Installation
6

Commissioning, operation and decommissioning

WARNING
WARNING
CAUTION
CAUTION
CAUTION
NOTICE
6.1

Checklist for commissioning

Before the initial commissioning, complete the check list for commissioning.
Before the initial commissioning check if your unit meets the requirements on meeting the pre-set
setpoint values!
22
|
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Risk of injury due to improper operation!
Improper operation of the machine can cause serious or fatal injuries.
Ø Strictly observe the safety instructions. Especially observe the safety instruc-
tions in chapter 2.
Risk of injuries due to rotating parts!
There is the risk of drawing in and trapping of limbs on rotating parts. Limbs can
be crushed or severed.
Ø The central vacuum unit may not be operated without housing.
Risk of injury due to hot surfaces!
When the machine is at operating temperature the surface temperatures on the
components may rise to above 70 °C. This can cause burns.
Ø Do not touch hot surfaces (indicated by warning signs).
Ø Wear suitable protective gloves, if necessary.
Risk of injury due to noise emission!
High sound pressure level can permanently damage hearing.
Ø Observe measured sound pressure level, see chapter 9.
Ø When spending a long time in the vicinity of the running machine use ear pro-
tection to avoid permanent damage to hearing.
Risk of injury due to drawing in and trapping!
Due to the high pumping capacity it is possible that fingers are drawn in the inlet
connection and injured.
Ø Do not put your hands onto the inlet connection to check the suction.
Property damage!
Restart of the machine while the machine has not coasted down completely can
damage the machine.
Ø The machine is only allowed to be switched on again after it stands still.
Tel. 071 918 60 60, Mail: v-g@prematic.ch